BOOK · LESSON 7

第 7 课：项目设置与偏好L7: Project Setup and Preferences

按教材子目录切分的跟练卡：每张卡一页，跟着步骤做项目。One card per book section, each on its own page.

14 sections

  1. 创建新项目Creating a New Project6 steps
  2. 浏览源媒体Exploring the Source Media10 steps
  3. 项目设置Project Settings10 steps
    TASK 1Task 1配置项目设置Configure Project SettingsTASK 2Task 2保存预设Save Settings as Preset
  4. 导入媒体Importing Media5 steps
  5. 配置音频Configuring the Audio7 steps
  6. 同步音画素材Syncing the Dailies8 steps
  7. 使用元数据Working with Metadata17 steps
    TASK 1Task 1标记精彩镜头Mark Good TakesTASK 2Task 2搜索镜头评论Search Clip Comments
  8. 创建关键词智能文件夹Creating Keyword Smart Bins10 steps
    TASK 1Task 1创建关键词智能箱Create Keyword Smart BinTASK 2Task 2导入元数据文件Import Metadata File
  9. 创建自定义 Smart BinCreating Custom Smart Bins16 steps
    TASK 1Task 1创建智能BinCreate Smart BinTASK 2Task 2整理自定义BinOrganize Custom Bins
  10. 使用元数据重命名片段Renaming Clips with Metadata9 steps
  11. 创建子剪辑Creating Subclips16 steps
    TASK 1Task 1创建子剪辑素材库Create Subclip BinTASK 2Task 2标注子剪辑元数据Tag Subclip Metadata
  12. 系统偏好设置System Preferences5 steps
  13. 用户偏好设置User Preferences9 steps
  14. 探索键盘快捷键Exploring Keyboard Shortcuts13 steps
    TASK 1Task 1查找键位功能Inspect Key AssignmentsTASK 2Task 2设置自定义快捷键Assign Custom Shortcut

单元任务Unit Brief

你的任务

把"装好 Resolve"推进到"拥有一个自己的标准工程"：核对保存机制和偏好，定好项目设置并存成默认预设，再把项目和预设双双导出存档。目标是在机房任何一台机器上，你都能用几分钟回到自己顺手的状态。

素材要求

  • 不需要拍摄素材，任意几段练习片段或教材配套工程即可
  • 准备一个 Resolve 之外的存放处：网盘或 U 盘，用来放你的 .drp 和 .preset 档案

步骤提示

  1. 先搭安全网：打开 Preferences 确认 Live Save 开着、Timeline Backups 的间隔合你心意，并记住崩溃之后去哪里找回项目
  2. 在项目管理器里新建你的主项目，命名规则想好（如 w1-practice），顺便新建、切换、删除各练一次
  3. 按 Shift-9 定好时间线分辨率和帧率，把整套设置存成带参数名的预设，并 Set as Default Preset
  4. 把项目 Export 成 .drp、预设 Export 成 .preset，存进网盘或 U 盘；下次坐进机房，先验证用这两个文件能不能把顺手状态完整复原

自评标准

Your task

Move from "Resolve is installed" to "I own a standard project": verify the save mechanisms and preferences, lock in your project settings as a default preset, then export both the project and the preset. The goal: on any lab machine, you can be back to your comfortable setup within minutes.

Footage

  • No shooting required — any few practice clips or the companion project will do.
  • Prepare a home outside Resolve: a cloud drive or USB stick for your .drp and .preset archives.

Suggested steps

  1. Build the safety net first: open Preferences, confirm Live Save is on and the Timeline Backups interval suits you, and note where to look after a crash.
  2. Create your main project in the Project Manager with a naming rule you'll keep (e.g. w1-practice); practice creating, switching and deleting once each.
  3. Press Shift-9, set the timeline resolution and frame rate, save the whole configuration as a preset whose name carries the specs, then Set as Default Preset.
  4. Export the project as a .drp and the preset as a .preset into your cloud drive or USB stick. Next time you sit down at a lab machine, verify first that these two files restore your setup completely.

Self-check

本课自测Lesson Quiz