色彩扭曲Color Warping
学习目标LEARNING OBJECTIVES
学完你能用 Color Warper 的 Hue–Saturation 模式一次拖动同时改色相与饱和度，并能用 Chroma Warper 的图钉锁定不想动的颜色。
概念说明CONCEPTS
色彩扭曲（Color Warping）是用 Color Warper / Chroma Warper 在网格或色度图上直接推拽颜色的工具——比曲线更视觉化，一次拖动完成两个参数的变化。
- 一拖改两参：
Hue–Saturation模式下，点离中心越远饱和度越高，拖向哪个色向就偏向哪个色——曲线要两条干的事，它一次完成。 - 分段数可调：Color Warper 默认分成 6 段，在面板选项里可加到 8 段，控制更精细。
- Chroma Warper 画"行程"：在色度图上取样后拖动，会留下起点到终点的箭线，颜色从哪推到哪一目了然。
- 图钉保护色：Chroma Warper 的 Pin 工具能把某个色相钉在原地——钉住红裙子再给沙漠加暖，裙子纹丝不动。
操作步骤STEPS
- 在中间面板工具栏点 Color Warper 图标——默认打开的是 Chroma Warper
- 点面板右上角菜单，把模式切到
Hue–Saturation - 取色器在画面目标颜色上点击，网格中对应的控制点被选中
- 向外拖增加饱和度，朝目标色向拖改变色相——两种变化同时发生
- 要用 Chroma Warper：新建串行节点，先用 Pin 工具钉住保护色，再拖其他颜色的描线
练习PRACTICE
- 找一段橙蓝对比明显的素材，用
Hue–Saturation模式取样橙色区域，一次拖动同时加饱和、加暖。 - 切到 Chroma Warper，先钉住主体衣服的颜色，再推动背景色，确认被钉的颜色不受影响。
常见问题FAQ
Color Warper 和 HSL 曲线怎么选？
曲线一次只调一个参数，平滑精确；Warper 一次拖两个参数，直观快速。找感觉用 Warper，精细微调回 HSL 曲线。
拖点时牵连了不想动的颜色怎么办？
换 Chroma Warper，用 Pin 工具把要保护的颜色钉住再拖。另外拖动幅度别贪大，小幅推动效果更自然。
误加的控制点怎么删？
右键点该控制点即可删除。注意要用创建它时的同一类工具去操作，否则点不中。
Learning Objectives学习目标
After this card you can use the Color Warper's Hue–Saturation mode to change hue and saturation in one drag, and pin colors in place with the Chroma Warper.
Concepts概念说明
Color warping pushes colors around directly on a grid or chromaticity diagram with the Color Warper and Chroma Warper — more visual than curves, changing two parameters in a single drag.
- One drag, two parameters: in
Hue–Saturationmode, dragging away from the center adds saturation while dragging toward a color shifts hue — what takes two curves takes one move here. - Adjustable segments: the Color Warper starts with 6 segments; raise it to 8 in the panel options for finer control.
- Chroma Warper shows the journey: sample and drag on the chromaticity diagram and an arrow line appears, showing exactly where the color came from and went to.
- Pins protect colors: the Chroma Warper's Pin tool nails a hue in place — pin the red dress, then warm up the desert, and the dress won't budge.
Steps操作步骤
- Click the Color Warper icon in the middle-panel toolbar — it opens as the Chroma Warper by default
- Open the panel's upper-right menu and switch the mode to
Hue–Saturation - Click the target color in the viewer with the eyedropper — the matching control point lights up
- Drag outward for saturation, toward a color to shift hue — both change at once
- For the Chroma Warper: add a serial node, pin the colors to protect, then drag the strokes of the others
Practice练习
- Take a shot with a clear orange-blue contrast, sample the orange area in
Hue–Saturationmode, and add saturation plus warmth in a single drag. - Switch to the Chroma Warper, pin the subject's clothing color first, then push the background — confirm the pinned color stays put.
FAQ常见问题
Color Warper or HSL Curves — which do I reach for?
Curves adjust one parameter at a time, smooth and precise; the Warper moves two at once, fast and intuitive. Explore with the Warper, fine-tune with HSL Curves.
My drag affected colors I wanted untouched — now what?
Switch to the Chroma Warper and pin the colors to protect before dragging. And keep drags small — subtle moves look more natural.
How do I delete a control point I added by mistake?
Right-click the point to remove it. Use the same tool that created it, or the click won't land.
本卡术语Terms in this card
对比度Contrast 曲线Curves 饱和度Saturation 色度扭曲器Chroma Warper 色彩扭曲器Color Warper HSL 曲线HSL Curves 节点Node