媒体重新链接Media Relink
学习目标LEARNING OBJECTIVES
学完你能判断片段为什么显示离线（Offline），并用重新链接（Relink）把素材整批连回项目。
概念说明CONCEPTS
重新链接是在素材被移动或改名后，把项目里的片段重新指向磁盘文件的操作——片段与文件之间靠路径连接，路径断了片段就离线。
- 链接记的是路径：导入时 Resolve 记下每个文件的完整位置；文件被移动、改名或所在磁盘没接上，链接即断。
- 离线不等于丢失：Offline 只是"按原路找不到"，磁盘上的素材还在，重新指路就能恢复。
- 红色按钮是信号：媒体池上方出现红色
Relink Media按钮，说明有意外离线的媒体。 - 指一个文件夹就够：点
Locate选中新位置，Resolve 自动搜索并重连整批文件。 - 找不到再全盘搜：
Disk Search扫描整个磁盘，更彻底但慢得多。
操作步骤STEPS
- 看到片段显示 Offline，点媒体池上方红色的
Relink Media按钮
- 在 Relink Media 窗口确认离线文件数量，点
Locate
- 在系统文件窗口里选中素材现在所在的文件夹，点
Open - 等 Resolve 自动搜索并重连，确认片段恢复显示
- 找不到时回到 Relink Media 窗口，点
Disk Search做全盘搜索
练习PRACTICE
- 把练习素材文件夹整体挪到另一个位置，打开项目看片段变离线，再用
Relink Media连回来。 - 把鼠标悬停在 Relink Media 窗口的原路径上，记下 Resolve 期望的位置，体会"路径即链接"。
常见问题FAQ
片段显示 Offline，是文件被删了吗？
多半不是。Offline 只代表按原路径找不到文件——文件可能被移动，或所在磁盘没接上。先确认素材在哪，再重新链接。
我把素材从桌面挪进了素材盘，怎么补救？
打开项目后点红色 Relink Media 按钮，用 Locate 指向素材盘里的新文件夹，整批文件会自动重连。
Locate 选对了文件夹还是找不到？
文件名可能被改过，或文件不在所选的文件夹里。回到 Relink Media 窗口点 Disk Search 扫描整个磁盘——大磁盘会很慢，耐心等。
怎么才能永远不用重新链接？
素材导入前就放进位置固定的素材盘，导入后不再移动、改名。真要搬动，用软件内的 Media Management 功能，链接会自动更新。
Learning Objectives学习目标
After this card you can tell why a clip shows as Offline, and use Relink to reconnect a whole batch of media to your project.
Concepts概念说明
Relinking points a clip back at its file on disk after the file has been moved or renamed — clips and files are connected by paths; when the path breaks, the clip goes offline.
- Links are paths: on import, Resolve records each file's full location; moving, renaming, or unmounting the drive breaks the link.
- Offline is not lost: Offline only means "not where I expected" — the media still exists, and new directions bring it back.
- The red button is the signal: a red
Relink Mediabutton above the Media Pool means media went unexpectedly offline. - One folder is enough: click
Locate, pick the new location, and Resolve searches and reconnects the whole batch. - Disk Search as fallback:
Disk Searchscans the entire drive — more thorough, but much slower.
Steps操作步骤
- When clips show Offline, click the red
Relink Mediabutton above the Media Pool - Check the offline file count in the Relink Media window, then click
Locate - In the system file window, select the folder where the media now lives and click
Open - Wait while Resolve searches and reconnects, then confirm the clips are back
- If files are still missing, return to the Relink Media window and click
Disk Search
Practice练习
- Move a practice media folder somewhere else, open the project to see clips go offline, then relink them with
Relink Media. - Hover over the original path in the Relink Media window and note where Resolve expected the files — "the path is the link".
FAQ常见问题
Does Offline mean my files were deleted?
Probably not. Offline only means the file isn't at its old path — it may have been moved, or the drive isn't connected. Find where the media is, then relink.
I moved my media from the desktop to a media drive — how do I fix it?
Open the project, click the red Relink Media button, and use Locate to point at the new folder on the media drive — the whole batch reconnects automatically.
I picked the right folder in Locate but files are still missing?
The file names may have changed, or the files aren't in that folder. Go back to the Relink Media window and click Disk Search to scan the whole drive — be patient with large drives.
How do I never need to relink again?
Put media on a fixed-location drive before importing, and never move or rename files afterwards. To relocate media, use Resolve's built-in Media Management so links update automatically.
深度资料：媒体重新链接 →Deep dive: 媒体重新链接 →
本卡术语Terms in this card
媒体池Media Pool 重新链接媒体Relink Media 媒体管理Media Management 窗口Power Window 静帧Still