多机位片段Multicam Clip

难度LEVELL3 · 高级L3 · Advanced 领域TOPIC剪辑

先学：Prerequisites: 自动对齐片段

学习目标LEARNING OBJECTIVES

学完你能把同一时刻多机位拍摄的素材，在媒体池里打包成一个多机位片段（Multicam Clip）并放上时间线。

概念说明CONCEPTS

多机位片段（Multicam Clip）是把多个同步机位封进一个容器的特殊片段——时间线上它看着像普通片段，里面却装着每台机器的画面，随时可换。

  • 容器不是新素材：多机位片段只引用原有机位片段，原始素材仍留在媒体池里。
  • 同步靠共同依据：创建时按时间码（Timecode）或现场声波形（Sound）对齐，前提与 自动对齐片段 相同。
  • 时间线上当普通片段用：拖入、修剪、移动的操作完全一样，区别只在"里面有几台机器"。
  • 换角度是后续动作：看角度用 多机位查看器，边放边切用 实时多机位剪辑，改单个切点用 镜头选择器。

操作步骤STEPS

  1. 在媒体池中框选同一时刻开拍的各机位片段
  2. 右键选 Create Multicam Clip Using Selected Clips右键菜单创建多机位片段
  3. 同步依据选 Sound（有统一时间码就选 Timecode），勾选 Detect clips from same camera 后点 Create
  4. 媒体池里出现带多机位角标的片段，原片段自动归入 Original Clips 媒体夹带多机位角标的片段
  5. 把它当普通片段拖入时间线，多机位剪辑的素材就备好了

练习PRACTICE

  1. 用两段同场景素材创建一个多机位片段，拖进时间线播放一遍。
  2. 删掉时间线上的多机位片段，从媒体池再拖一次，确认容器可反复使用。

常见问题FAQ

建好多机位片段，原来的片段还在吗？

在。多机位片段只是引用，原片段被归进 Original Clips 媒体夹，随时能单独拿出来用。

各机位没对准、画面错开了怎么办？

多半选错了同步依据。删掉多机位片段重建：波形对不齐就改 Timecode，或先手动对好入点再选 In。

建好之后能再加一个机位进去吗？

不能追加。把新机位片段和原有各机位一起重新创建多机位片段，再替换时间线上的旧片段。

Learning Objectives学习目标

After this card you can bundle clips shot simultaneously by multiple cameras into a Multicam Clip in the Media Pool and edit it onto a timeline.

Concepts概念说明

A Multicam Clip is a special container clip that wraps several synced camera angles into one — on the timeline it behaves like a normal clip, but every camera's picture rides inside, ready to swap.

  • A container, not new media: a multicam clip only references the original angle clips, which stay in the Media Pool.
  • Sync needs a shared reference: at creation, angles align by Timecode or by production-sound waveforms (Sound) — same requirements as Auto Align Clips.
  • Treat it like a normal clip: dragging, trimming, and moving all work as usual; the only difference is how many cameras live inside.
  • Switching angles comes next: browse angles with the Multicam Viewer, cut live with Live Multicam Editing, fix a single cut with the Angle Selector.

Steps操作步骤

  1. In the Media Pool, marquee-select every angle that rolled at the same moment
  2. Right-click and choose Create Multicam Clip Using Selected ClipsCreate Multicam Clip in the right-click menu
  3. Set sync to Sound (or Timecode if all cameras share it), tick Detect clips from same camera, then click Create
  4. A clip with a multicam badge appears in the bin; the originals move into an Original Clips binThe clip with a multicam badge
  5. Drag it into the timeline like any clip — your multicam material is ready

Practice练习

  1. Build a multicam clip from two angles of the same scene, drag it onto a timeline, and play it through.
  2. Delete the multicam clip from the timeline and drag it in again from the Media Pool to confirm the container is reusable.

FAQ常见问题

Once the multicam clip exists, are my original clips gone?

No. The multicam clip only references them. The originals move into an Original Clips bin and can be used on their own anytime.

The angles came out offset from each other — now what?

You probably picked the wrong sync basis. Delete the multicam clip and rebuild: if waveforms fail, try Timecode, or manually set matching In points and choose In.

Can I add another camera angle afterwards?

Not to an existing multicam clip. Rebuild it from the new angle plus the original ones, then replace the old clip on the timeline.

深度资料：多机位片段 →Deep dive: 多机位片段 →

本卡术语Terms in this card

媒体夹Bin 媒体池Media Pool 时间线Timeline 修剪Trim 偏移Offset 元数据Metadata 时间码Timecode