最终确定镜头Finalize Angle

难度LEVELL2 · 进阶L2 · Intermediate 领域TOPIC剪辑

先学：Prerequisites: 镜头选择器

学习目标LEARNING OBJECTIVES

学完你能在镜头选择器里定稿后，一键移除所有未选中的镜头，把容器收拢成一个普通片段。

概念说明CONCEPTS

最终确定镜头（Finalize Angle）把镜头选择器收拢成你选定的那一个镜头——右键片段选 Finalize Take，容器和其余候选全部移除，时间线上只留最终选择。

  • 只留选定镜头：执行后容器消失，当前显示的镜头成为普通的独立片段。
  • 候选清出但不丢素材：未选中的镜头从容器里移除，源素材仍安然留在媒体池。
  • 要在容器外执行：先关闭镜头选择器面板再右键片段——面板开着时右键菜单里没有这一项。
  • 反悔靠撤销：刚执行完可用 Command/Ctrl-Z 撤回；事后再想要备选，只能重建容器。

操作步骤STEPS

  1. 双击片段名左侧的徽章打开镜头选择器，确认当前高亮的就是最终要用的镜头
  2. 点面板左上角的关闭按钮，退出镜头选择器
  3. 在时间线上右键该片段，选择 Finalize Take右键菜单中的 Finalize Take
  4. 徽章消失，片段恢复为普通片段，清理完成

练习PRACTICE

  1. 造一个三镜头的镜头选择器，选定第二条后执行 Finalize Take，确认徽章消失、时长正确。
  2. 再执行一次 Finalize Take 后立刻 Command/Ctrl-Z 撤销，观察容器原样回来。

常见问题FAQ

最终确定后，被移除的镜头去哪了？

只是从时间线的容器里清掉，源素材还在媒体池。想再比较，重新右键建 Take Selector 拖回来即可（见 镜头选择器）。

右键菜单里找不到 Finalize Take？

两个常见原因：镜头选择器面板还开着——先关闭；或这个片段根本没有容器——它只对带徽章的片段出现。

最终确定能撤销吗？

刚执行完可以 Command/Ctrl-Z 撤销。一旦中间做了别的操作，就只能重建容器手动找回备选镜头。

Learning Objectives学习目标

After this card you can collapse a take selector down to your chosen shot, removing every unused candidate in one move and leaving a normal clip.

Concepts概念说明

Finalize Angle collapses the take selector to the one shot you chose — right-click the clip and choose Finalize Take; the container and every other candidate are removed, leaving only your final pick on the timeline.

  • Keeps only the chosen shot: after finalizing, the container is gone and the visible shot becomes a regular standalone clip.
  • Candidates cleared, media safe: unused shots leave the container, but the source media stays untouched in the Media Pool.
  • Done from outside the panel: close the take selector first, then right-click the clip — the command isn't in the menu while the panel is open.
  • Regret means Undo: right after finalizing, Command/Ctrl-Z brings the container back; later on, rebuilding it by hand is the only way.

Steps操作步骤

  1. Double-click the badge at the left of the clip's name to open the take selector, and confirm the highlighted shot is the one you want
  2. Click the close button at the panel's upper left to exit the take selector
  3. Right-click the clip in the timeline and choose Finalize TakeFinalize Take in the right-click menu
  4. The badge disappears and the clip is back to normal — cleanup done

Practice练习

  1. Build a three-shot take selector, pick the second take, run Finalize Take, and confirm the badge is gone and the duration is right.
  2. Run Finalize Take once more, immediately undo with Command/Ctrl-Z, and watch the container return intact.

FAQ常见问题

Where do the removed shots go after finalizing?

They're only cleared from the timeline container — the source media stays in the Media Pool. To compare again, right-click the clip, rebuild a Take Selector, and drag them back in (see Angle Selector).

I can't find Finalize Take in the right-click menu?

Two usual causes: the take selector panel is still open — close it first; or the clip has no container at all — the command only shows up for badged clips.

Can I undo a finalize?

Yes, right after the fact with Command/Ctrl-Z. Once other operations sit on top of it, rebuilding the container by hand is the only way back.

深度资料：最终确定镜头 →Deep dive: 最终确定镜头 →

本卡术语Terms in this card

媒体池Media Pool 时间线Timeline 静帧Still