Film Look Creator

难度LEVELL3 · 高级L3 · Advanced 领域TOPIC调色

先学：Prerequisites: 一级调色

学习目标LEARNING OBJECTIVES

学完你能用 Film Look Creator 给画面加胶片质感，并说清它和 LUT 的本质区别。

概念说明CONCEPTS

Film Look Creator 是 Resolve 19+ 内置的参数化胶片模拟效果——不是 LUT，也不是第三方插件；每个参数都实时可调，从"一层薄颗粒"到"老电影"都能捏出来。

  • 参数化而非查表：LUT 是固定变换表，Film Look Creator 是一组可调算法——颗粒大小、光晕强度都无级可调。
  • 自带 6 个预设：Preset 下拉提供 6 种胶片风格起点，先选预设再微调是最高效的用法。
  • 颗粒会"咬"画面：Film Grain 按画面亮度分布，暗部颗粒更明显——和叠一层噪点素材完全两回事。
  • 光晕加柔光：Halation 模拟高光边缘的红色溢出，Bloom 让高光柔和扩散，是胶片感的两大来源。
  • 老电影痕迹：Gate Weave、Flicker、Dirt 模拟放映抖动、闪烁和灰尘，只有做复古效果时才用。

操作步骤STEPS

  1. 在调色页选中节点树靠后的一个节点，打开右上角 Effects 面板
  2. 搜索 Film Look Creator，把它拖到该节点上Effects 面板里的 Film Look Creator
  3. 在效果设置里打开 Preset 下拉，选一个胶片预设作起点
  4. 调 Film Grain 的强度与颗粒大小，放大画面检查暗部颗粒颗粒参数与放大检查暗部
  5. 按需微调 Halation、Bloom，整体太重就用 Blend 收一点

练习PRACTICE

  1. 给同一镜头分别套两个不同预设，开关节点对比两种胶片风格的差异。
  2. 从零捏一个"老纪录片"效果：加颗粒和少量 Flicker、Gate Weave，再用 Blend 收到不抢戏的程度。

常见问题FAQ

想要胶片感，用它还是套 LUT？

LUT 快但固定；想微调颗粒和光晕就用 Film Look Creator。两者也能叠加：LUT 定色调，它加质感。

加上之后预览变卡了？

颗粒和光晕是实时计算的，比较吃 GPU。粗剪时先禁用该节点，定稿渲染前再打开。

效果面板里搜不到它？

Film Look Creator 需要 Resolve 19 或更高版本，在调色页 Effects 面板里搜索；旧版本没有这个功能。

Learning Objectives学习目标

After this card you can add film texture with the Film Look Creator and explain how it fundamentally differs from a LUT.

Concepts概念说明

Film Look Creator is Resolve 19+'s built-in parametric film emulation effect — not a LUT, not a third-party plugin. Every parameter adjusts in real time, from a whisper of grain to full-on old-movie.

  • Parametric, not a table: a LUT is a fixed transform; Film Look Creator is a set of tunable algorithms — grain size and halation strength adjust continuously.
  • Six built-in presets: the Preset menu offers 6 film-style starting points; pick one and fine-tune — the fastest way to work.
  • Grain bites into the image: Film Grain distributes by brightness and shows more in the shadows — nothing like overlaying a noise clip.
  • Halation plus bloom: Halation simulates the red fringe around highlights, Bloom spreads them softly — the two big sources of film feel.
  • Old-film artifacts: Gate Weave, Flicker and Dirt mimic projector wobble, flicker and dust — reach for them only when you want a vintage look.

Steps操作步骤

  1. In the Color page, select a node near the end of the tree and open the Effects panel at the top right
  2. Search for Film Look Creator and drag it onto that nodeEffects 面板里的 Film Look Creator
  3. In the effect settings, open the Preset menu and choose a film preset as your starting point
  4. Adjust Film Grain strength and size; zoom in to check the grain in shadow areas颗粒参数与放大检查暗部
  5. Fine-tune Halation and Bloom to taste; if the whole thing is too much, pull Blend down

Practice练习

  1. Apply two different presets to the same shot and toggle the node to compare the two film styles.
  2. Build an "old documentary" look from scratch: add grain plus a little Flicker and Gate Weave, then dial Blend back until it stops stealing the scene.

FAQ常见问题

For film feel, this or a LUT?

A LUT is fast but fixed; pick Film Look Creator when you want to tune grain and halation. You can also stack them: LUT for the color signature, this for texture.

Playback got choppy after I added it?

Grain and halation compute in real time and tax the GPU. Disable the node while rough-cutting and re-enable it before the final render.

I can't find it in the Effects panel?

Film Look Creator needs Resolve 19 or later — search for it in the Color page Effects panel; older versions don't have it.

本卡术语Terms in this card

预设Preset 渲染Render 调色页Color page 调色Grade LUT（查找表）LUT 节点Node 变换Transform